Tube stainless round 76,1Х2,0 AISI 201 (mirror)

(Code: 7612201)
Hits: 2548 | Rating:
10.00 / 10 7
Manufacturer: TAIWAN
Price: 261.15 ГРН
Weight: 3.711 Kg
Quantity in stock: Unlimited

Stainless steel pipes for flagpole

How to make a flagpole stainless pipe alone (homemade flagpole)

The moment the flag-raising a little with what can be compared on the solemnity. Raising the flag gives any event a certain importance and the seriousness of the situation. But the flag itself - just the canvas to make it more than that allows the flagstick stainless pipes - for fixing construction (lift) flag allows to set the canvas to the desired height. Design stainless steel flagpole should be a line between strength and accuracy. She carries a huge ideological burden. Durability is very important. The flag should be in all weather conditions have a reliable point of attachment. The best design solution for the base of the flagpole is a stainless tube. The mast for the flag, made of stainless steel tubes, has a very important advantage over the other options, having a maximum strength with minimum material consumption. Stainless steel pipes can insert concentrically with each other (with the largest diameter of the bottom, top with the least). This design allows you to shift the center of gravity of the whole structure down, the flagpole will be more stable. Stainless steel pipes for the flagpole (its diameter and wall thickness) is selected on the basis of the expected height of the flagpole, flag weight, its area and possible wind loads. Note that the structure of the flagpole can be inclined, not only vertical, then the flagpole by a special bracket attached to the building wall. In this case, the base will take more constant load, which should be considered when choosing the material of the flagpole. Stainless steel flagpole - the most practical and durable solution. The mast of a conventional stainless steel tube (not even a telescopic structure) can be up to 12 meters height and serve for many years. True at such a height, special attention should be paid to the foundation of the flagpole, the reliability of anchor bolts, burial flagpole - ie stainless steel pipes for the flag to be the most reliable part of the whole structure. Keep in mind, especially when mounting that the flagpole could serve as a lightning rod. How to make a flagpole with their hands? Homemade flagpole can be created from ordinary stainless steel pipe that you can buy in the company Steynles Steele Ukraine in Kiev at a good price with shipping! TONER BUY! This is a proven option and durability, and aesthetics. Stainless mirror (polished) pipe is a great base element of the flagpole, height 6 to 12 meters. Finial on this flagpole put the plug. She will perform not only a decorative function, but not precipitation will fall into the n / w tube, which considerably extend the service life. In addition to bases in the form of stainless steel tubing flagpole structure includes a cord for raising the flag, the elements for fixing the cable in position (a bollard on the pipe or rod for driving into the ground). As additional elements that simplify the lifting and lowering of the flag, as well as provide the maximum safety of the web, you can use Eyelets (rivets with a hole in the middle for fixing on fabric and cord threading), hooks, blocks system, and even rotating units to prevent flag winding around the flagpole. But it is not just the flagpole, and product engineering.

Comments
Антон, 25.11.2015
Класная труба из нержавейки.
admin, 28.11.2014
Владислав! Вы же будьте честным. Напишите о причине ржавчины на трубе: труба поржавела по причине контакта нержавейки с черным металлом. А именно: вместо колец из нержавейки для сдерживания тросика были приваренные кольца из черного метала. Вот и все. Вот и вся причина ваших бед. Плюс агрессивный приморский климат сделал свое дело. По моему если Вы постоянно работаете с нержавейкой то давным давно должны знать: НЕРЖАВЕЙКА И ЧЕРНЫЙ МЕТАЛ НЕ СОВМЕСТИМЫ!
Аноним, 28.11.2014
Да ничего... Читайте здесь:https://stainle...200
Владислав, 28.11.2014
В Крыму в Ялте... а что?
Аноним, 28.11.2014
Владиславу
вопрос: в какой области Украины вы ставили флагшток из этой трубы?
Владислав, 11.11.2014
А у меня поржавела. Пошла точечная коррозия.... Вот такая 201 нержавейка
Сергей , 16.10.2014
То что нужно для флагштоков. Покупал раньше только 304 сталь на это дело. Год назад взял трубы из 201 стали на пробу на несколько флагштоков. Было очень страшно: переживал чтоб не пошла ржавчина.... И... о чудо!!! прошло время а флагштокам хоть бы что)) стоят родненькие с жовто-блакитними прапорами.... на зло врагам и конкурентам...
Слава Украине!
Write a comment for this product!
Name
E-mail
Please write comment
Rating for product
Unit: meter
The price is for: 1 meter
Size/outer diameter ∅: 76,1 mm
Wall thickness: 2,0 mm
The length of a pipe: 6 meters
Minimum order: 3 meters and a multiple of 3 (E.g. 3, 6, 9 m, etc.)
Surface: 600 GRIT (mirror polished, glossy)
Welded: TIG seam (Tungsten Insert Gas)
Cross-cutting ―❘―❘―: 1 cut = 9,30 uan
Steel grade: AISI 201 (12Х15Г9НД)
 Copyright MAXXmarketing GmbH